Dual AX440 Service Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 21
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
IPIONEER
RECEPTION OF
BROADCAST
r
BEFORE TURNING
ON
THE
POWER
SWITCH
OF THE
SX.44O,
CHECK THE FOLLOWING:
VOLUME
CONTROL
KNOB
(14)
is set
to
"MtN".
TAPE
MONITOR
SWITCH
(12)
issetto
"OFF".
MODE
SWITCH
(11)
set
to
"STEREO".
SPEAKER
ON/OFF SWITCH
(7)
is set to
"ON".
(lf
using a stereo
headphone,
set
the s^/itch to
"OFF").
r
RECEPTION
OF FM BROADCAST:
1, SEt thE
SELECTOR
KNOb
(5)
tO thE
"FM
STEREO"
position.
2.
While observing the
pointer
deflection
of the TUNING
INDICATOR
(2),
tune the
SX-440 to the
desired station by
using
the
TUNING knob
(4)
.
The
best reception isattained
when
the
pointer
of the TUNING
INDICATOR
(2)
largely
deflects
rightward. lf
the tuned station
is broadcasting
a
stereo
program,
the
STEREO INDICATOR
(3)
lights. With
the
SE
LECTOR knob
(5)
in
this
position,
monaural
programs
can also be
received.
3.
When the desired station
is tuned in,
gently
turn
the
VOLUME
CONTROL knob
(141
clockwise. Ad.iust the
BASS CONTROL
(9)
and TREBLE CONTROL
(10)
for
the
desired tone
quality.
.When
the
SX-2140
is
used very afar from
the broadcasting
station,
or external noise is intensive,
the noise
is sup-
pressed
and better
reception is attained by setting the
SELECTOR knob
(5)
to the
"FM
MONO"
position.
When the knob
is
in
this
position,
however, stereo
programs
are
received
as
monaural
programs.
(The
stereo indicator
is
unrelated
although it lights.)
4.
When
good
radio
reception
cannot be attained by
the
above operating
procedures
1 to
3. reconsider the
antenna,
referring
to the article
"ANTENNA
CONNECTION
AND
GROUNDING".
TRECEPTION
OF
AM BROADCAST:
1. Set the
SELECTOR
knob
(5)
to the
"AM"
position.
2.
While observing
the
pointer
deflection
of
the TUNING
INDICATOR
(2).
tune
the SX440 to the desired station by
using the
TUNING knob
(4).
The
best reception is attained
when
the
pointer
of the
TUNING
INDICATOR
(2)
largely
deflects rightward.
3.
When
the desired
station is tuned
in, adjust the VOLUME
CONTROL
(14),
BASS CONTROL
(9)
and TREBLE CON-
TROL
(10)
for
desired sound
volume
and tone
quality.
4. When
good
radio
reception cannot be attained, such as
speaker sound
is noisy or inferior in tone
quality
by the
above operating
procedures
1 to
3, re+onsider the antenna,
referring
to the
article
"ANTENNA
CONNECTION AND
GROUNDING".
When
the SX-440 is used very near
the
broadcasting station, the field intensity is sometimes too
strong, resulting
in low
tone
quality.
lf this occurs,
shorten or
remove
the antenna connected
to the
AM
antenna
terminal
for the best radio
reception.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

Comments to this Manuals

No comments